Update Cisco Certification 300-135 TSHOOT exam sample questions

Since Cisco 300-135 certification is so popular and our Passtcert can not only do our best to help you pass the exam, but also will provide you with one year free update service, so to choose Passtcert to help you achieve your dream. For tomorrow's success, is right to choose Passtcert. Selecting Passtcert Cisco Certification 300-135 TSHOOT exam sample questions, you will be an IT talent.Cisco certification 300-135 exam is the first step for the IT employees to set foot on the road to improve their job. Passing Cisco certification 300-135 exam is the stepping stone towards your career peak.

But this is still not enough. In the IT industry, Cisco 300-135 exam certification is the essential certification of the IT industry. Because this exam is difficult, through it, you may be subject to international recognition and acceptance, and you will have a bright future and holding high pay attention. Passtcert Cisco Certification 300-135 TSHOOT exam sample questions have the world's most reliable IT certification training materials, and with it you can achieve your wonderful plans.

Share some CCNP 300-135 exam questions and answers below.
The Fault Condition is related to which technology? 
A. BGP 
B. NTP 
C. IP NAT 
D. IPv4 OSPF Routing 
E. IPv4 OSPF Redistribution 
F. IPv6 OSPF Routing 
G. IPv4 layer 3 security 
Answer: A 


How to check MTU of interface using ping? / How can you check the links mtu size with ping command? 
A. ping 10.1.1.1 size 1501 
B. ping 10.1.1.1 size 1500 df-bit 
C. ping 10.1.1.1 
D. ping 10.1.1.1 no-size 
Answer: B

What is the solution of the fault condition? 
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command 
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command 
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command 
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command 
Answer: C 


What is the solution to the fault condition? 
A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command. 
B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command. 
C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command. 
D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command. 
Answer: D

The fault condition is related to which technology? 
A. NTP 
B. IPv4 OSPF Routing 
C. IPv6 OSPF Routing 
D. IPV4 and IPV6 Interoperability 
E. IPv4 layer 3 security 
Answer: D

What is the solution of the fault condition? 
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command 
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command. 
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command 
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command 
Answer: A

What is the solution of the fault condition? 
A. Under the BGP process,enter the bgp redistribute-internal command 
B. Under the BGP process, bgp confederation identifier 65001 command 
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number. 
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command. 
Answer: D

The Fault Condition is related to which technology? 
A. BGP 
B. NAT 
C. IP NAT 
D. IPv4 OSPF Routing 
E. IPv4 OSPF Redistribution 
F. IPv6 OSPF Routing 
G. IPv4 layer 3 security 
Answer: C 


Ticket 5 R1ACL 

TROUBLE TICKET STATEMENT: 
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server). 
show run by yourself to obtain the following information: 
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor. 
Configuration on R1 
! interface Serial0/0/0/1 
description link to ISP 
ip address 209.65.200.224 255.255.255.252 
ip access-group edge_security in 
ip nat outside 
ip virtual-reassembly 
ntp brasdcast client 
net broadcast key 1 
no cdp enable 
!! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255 
ip access-list nat_traffic permit 10.2.0.0 0.0.255.255 
! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any 
ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any 
ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any 
ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any 
ip access-list edge_security permit ip host 209.65.200.241 any 

On which device is the fault condition located? 
A. R1 
B. R2 
C. R3 
D. R4 
E. DSW1 
F. DSW2 
G. ASW1 
Answer: A 

Passtcert is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because Passtcert has a strong IT team of experts, they are committed to study Cisco Certification 300-135 TSHOOT exam sample questions, and serve the vital interests of the majority of candidates. They use their own professional mind and experience to meet the needs of the candidates. According to the needs of the candidate, they consider the issue from all angles, and manufacturing applicability exam training materials.

Related article: http://h12-221-enu-exam.blogspot.com/2017/09/update-cisco-certification-300-135.html