Share some Network Appliance NCDA Certification NS0-158 exam questions and answers below.
A customer wants to use a UTA2 PCIe card in a new FAS8000 system.
Which three steps must be completed before the customer is able to use the ports for Fc access to an FCP switch? (Choose three.)
A. Use the system hardware unified-connect modify command to change the personality from initiator to target.
B. Verify the WWPN of the UTA2 so that these can be used in the igroup to map the LUNs for host access.
C. Verify that the correct SFP+ is installed for FC.
D. Verify the card¡¯s hardware configuration by running the system hardware unified-connect show command.
E. Verify that Data ONTAP iSCSI, GIFS, and NFS are licensed on the system.
Answer: A,C,D
A customer cannot enable storage failover. You have verified that the cabling is correct, the HA partners can communicate with each other, and cluster HA is configured.
What must you do to resolve the problem?
A. Set the HA state in the maintenance boot menu.
B. Select option 4 in the boot menu.
C. Set switchless cluster in privilege advanced mode.
D. Modify epsilon in privilege advanced mode.
Answer: D
Which data protocol is available to use on an SVM?
A. FTP
B. CIFS
C. HTTP
D. TFTP
Answer: B
A NetApp cluster is connected to two network switches for resiliency. One of the network switches loses power. Most LIFs on the cluster automatically recover from the switch failure to and are reachable through the network. One LIF used for CIFS access is not reachable through the network until power is restored to the failed switch.
Which two areas should be investigated to determine the problem? (Choose two.)
A. The protocols allowed on the LIFs.
B. The LIFs failover-group configuration.
C. The LIFs home port.
D. The broadcast domain¡¯s member ports.
Answer: B,D
What is the maximum size of a compression group?
A. 8 KB
B. 4 KB
C. 32 KB
D. 64 KB
Answer: C
When creating a data aggregate, what is the default minimum number of disks for RAID4 and RAID-DP?
A. 5 for RAID4 and 9 for RAID-DP
B. 4 for RAID4 and 7 for RAID-DP
C. 3 for RAID4 and 5 for RAID-DP
D. 2 for RAID4 and 3 for RAID-DP
Answer: C
You acquired a new company that has the same private IP address range.
What must be set up on the NetApp cluster to support the duplicate networks?
A. VLANs
B. failover groups
C. IPspaces
D. DNS zone
Answer: C
Which statement is true about establishing a SnapMirror relationship in clustered data ONTAP?
A. It sets up the relationship, but does not start the initial transfer
B. It sets up the relationship on the source node only
C. It sets up the relationship and starts the initial data transfer
D. It sets up the relationship and creates the destination volume
Answer: A
You create a 1000 GB volume with space-guarantee set to none and fractional-reserve set to 0. In that volume you create a 400 GB LUN with space-reserve enabled. How much space is available in the volume before data is written to the LUN?
A. 400 GB
B. 0 GB
C. 600 GB
D. 1000 GB
Answer: C
It is the best training materials. You can use Passtcert Netapp NS0-158 dumps free download to pass the exam.Network Appliance NS0-158 exam is an popular examination of the IT industry , and it is also very important. We prepare the best study guide and the best online service specifically for IT professionals to provide a shortcut. Passtcert Netapp NS0-158 dumps free download cover all the content of the examination and answers you need to know.
Through the feedback of many examinees who have used Passtcert Netapp NS0-158 dumps free download to pass some IT certification exams, it proves that using Passtcert products to pass IT certification exams is very easy. Recently, Passtcert has developed the newest Netapp NS0-158 dumps free download, including some pertinent simulation tests that will help you consolidate related knowledge and let you be well ready for Network Appliance certification NS0-158 exam.
No comments:
Post a Comment